Technical Articles of Top Rotomolding

Rotomolding technology is also called rotational molding technology that put the plastic powder into the mold, so that the powder in the mold around the two vertical axes heat and rotate. Due to the rotation, powder changes unceasingly, and rubbers each other, the drag of its mold surface, which make...

There are many different kinds of rotomolding machine, and it can be classified according to mechanical mechanism and heating methods. The mechanical structure. As far as machinery is concerned, rotational molding machine can be classified according to mold installation way (depending on countershaft)...

Rotational molding portable sanitary is water-saving and has no pollution to the environment which can be widely used in locations with surrounding limitations such as large meeting space, squares, tourist attractions etc. With the expansion of its application, the rotomolding toilets have greatly facilitated...

Polyethylene is commonly used to produce rotational molding products and this kind of material has its own characteristics. 1. Due to the chemical features and non-polarity of its surface, polyethylene is difficult to adhere and print. Polyethylene is easy to have some chemical reaction such as photo-...

There are some important factors that have impact on the shrinkage of rotomolding products. 1. Impact of rotomolding technique. (1) When the temperature is same, while the pressure is increasing then the shrinkage is decreasing. (2) When the melt temperature is increasing, the shrinkage will be reduced....

It’s common to use the auxiliary agent during rotomolding processing, and the most frequently used in the releasing agent. The releasing agent plays a significant role in the quality of rotomolding product, therefore, it’s essential to choose the appropriate releasing agent.  There...

There are several methods of saving energy for rotomolding machine. 1.Reduce the gas thermal convection The gas thermal convection is a major way of heat dissipation, for the sealed rotomolding machine it has little impact. For the swing rotomolding machine, the mold is exposure to the air, the mold...

There are three key processing points for manufacturing polyethylene rotomolding products.  1.The releasing agent Due to the surface oxidation, the polyethylene powder may bond during heating. When the molds have some defects, the molten polyethylene will flow into these defects and form the embedment,...

Rotomolding products have some obvious advantages, but the manufacturing technique still has some limitation. For instance, the products are easily to have bubbles internally and cavities externally, as well as bending, shrinkage and discoloration. These problems are not only influences appearance and...

The high-quality rotomolding products need reasonable design which requires designers have profound knowledge and extensive experience.  1. Rotomolding products should have uniform thickness Generally speaking, most rotomolding products have uniform thickness for the rotomolding technique, except...

In order to meet the requirements of rotomolding technique, the raw material should have the following performance. (1) Thermal stability.  The raw material should have thermal stability so that can prevent the reducing performance when material ground into powder. Most rotomolding products will...

The rotomolding portable toilet has portability and applicability. It not only can be built with fixed structure, but also can be movable for its convenient inner facilities and has no other special requirements, except for electricity. In terms of function, the portable toilet is same as the traditional...